Industries
Aerospace
ISO S materials punish the wrong grade within minutes. We specify tooling around heat management at the edge and around the deflection budget of the part, then document what was supplied against the lot.
Titanium, nickel alloys and thin walls, machined to a traceable record.
- Typical workpiece materials
- Ti-6Al-4VInconel 718Waspaloy7075-T65115-5PH
What we get briefed on
- 01
Controlling notch wear in Inconel and Waspaloy
- 02
Holding form on thin-wall structural components
- 03
Full material and process traceability on every delivery
ISO material coverage
- S
Superalloys & titanium
Nickel and cobalt alloys, titanium, tungsten alloys
- M
Stainless steel
Austenitic, ferritic, duplex and super duplex
- N
Non-ferrous
Aluminium, copper alloys, brass, plastics
Tooling specified into this sector
VC-IN- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Carbide Inserts
Coated and uncoated indexable inserts across the full ISO P–H application range.
Indexable insertsView category
VC-MI- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
Milling Inserts
Square, round and high-feed inserts for shoulder, face and profile milling.
Indexable insertsView category
VC-EM- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
End Mills
Solid carbide end mills from 0.5 to 25 mm for slotting, profiling and finishing.
MillingView category
VC-CD- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Carbide Drills
Solid carbide drills 3×D to 30×D with internal coolant and self-centring points.
Hole makingView category
VC-TH- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Tool Holders
Turning holders and rotating toolholders in HSK, BT, SK and polygonal interfaces.
Tool holdingView category
VC-BB- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Boring Bars
Steel, solid carbide and tuned-mass damped bars for overhangs up to 14×D.
TurningView category
VC-TM- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Thread Mills
Single- and multi-profile thread mills for metric, UN and pipe threads.
ThreadingView category
VC-CH- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Chamfer & Deburring Tools
Chamfer mills, spot drills and back-deburring tools in 60°, 90° and 120°.
MillingView category
VC-EN- Steel
- Stainless steel
- Cast iron
- Non-ferrous
- Superalloys & titanium
- Hardened materials
Engineering Tooling
Purpose-built tooling engineered to the component, from print to first article.
Engineered & materialsView category
Aerospace
Working in this sector?
Send us the operation that is costing you the most and we will come back with a specific recommendation.
What you get back
- A specific tool recommendation with the reasoning behind it
- Starting cutting data with the limiting factor identified
- Lead time and pricing against a fixed part number
Technical response within one working day. Monday to Friday, 8:00 AM – 5:00 PM CET